BTXYC - STYCAST 1269B PART A
- MSDS: BTXYC
- Manufacturer: W R GRACE
- Product Name: STYCAST 1269B PART A
- National Stock Number: 8040-00N046653
Product Identification
Product ID:STYCAST 1269B PART A
MSDS Date:04/21/1986
FSC:8040
NIIN:00N046653
Kit Part:Y
MSDS Number: BTXYC
Responsible Party
WOBURN, MA 01888
US
Emergency Phone: 617-935-4850;617-828-3300
Info Phone: 617-935-4850;617-828-3300
Cage: IO627
Contractor
Telephone: 617-935-4850
Cage: IO627
Ingredients
PROPANE, 1-CHLORO-2,3-EPOXY-; (EPICHLOROHYDRIN) (SARA
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: < 5% PPM
OSHA PEL 2 PPM, S
ACGIH TLV: 2 PPM, S
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
NON HAZARDOUS INGREDIENT; (CYCLOALIPHATIC EPOXY RESIN)
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
OTHER ABSORB MATL. SCRAPE OR SHOVEL ABSORBED
RTECS: 9999999ZZ
WASH AREA WITH SOAPY WATER AND RINSE.
RTECS: 9999999ZZ
VAPOR. PROVIDE SPECIAL VENTILATION AT ELEVATED
RTECS: 9999999ZZ
ECH WOKERS HAS BEEN REPORTED TO SHOW "WEAK"
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPS CAN BE IRRIT. EYE:
IRRITATION UPON DIRECT CONTACT. SKIN: IRRITATION UPON DIRECT
CONTACT. PROLONGED EXPOSURE MAY RESULT IN SKIN SENSITIZATION.
INGEST: HARMFUL IF SWALLOWED. CHRONIC: IT IS VE RY UNLIKELY THAT
NORMAL WORK OPERATIONSWITH THIS PRODUCT COULD PRODUCE ATMOSPHERIC
EPICHLOROHYDRIN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:EPICHLOROHYDRIN: IARC GROUP 2A, SUPP 7,
P 202, 1987; ANTICIPATED TO BE A CARCINOGEN, NTP 6TH ANN RPT, 1991.
Effects of Overexposure:HLTH HAZ: CONCS APPROACHING THE OSHA LIMIT.
NERVERTHELESS, YOU SHOULD BE AWARE THAT ECH HAS BEEN REPORTED TO
PRODUCE CANCER IN LABORATORY ANIMALS AND TO PRODUCE MUTAGENIC
CHANGES IN BACTERIA AND CULTU RED HUMAN CELLS. AN ANALYSIS OF ALL
THEEVIDENCE TO DATE (THROUGH 1979) IN AN ONGOING EPIDEMIOLOGY STUDY
OF (ING 6)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. EYE: IMMED FLUSH EYES WITH WATER
FOR AT LEAST 15 MIN; GET MED ATTN. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AFFECTED AREA WITH WATER. INGEST: DILUTE WITH LARGE
QUANTITIES O F WATER; INDUCE VOMITING ONLY IF VICTIMIS CONSCIOUS
AND ALERT. GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:245F,118C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE EVOLVED UPON EXPOSURE
TO HEAT OR OPEN FLAME.
Accidental Release
Spill Release Procedures:SMALL SPILL: WIPE UP, OR ABSORB W/ VERMICULITE
OR OTHER ABSORBENT MATL. IF ACETONE OR OTHER SIMILAR SOLVS USED,
USE W/ADEQ VENT & FIRE PREC. COLLECT WASTE IN SEALED CNTNRS. WASH
AREA W/SOAPY WATER & R INSE. LRG SPILL: TURN ON ALL VENT EQUIP(SUPP
DATA
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE; KEEP REMOVED
FROM ANY HEAT OR OPEN FLAME. KEEP CONTAINER CLOSED WHEN NOT IN USE.
KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME.
Other Precautions:AVOID SKIN AND EYE CONTACT. USE ONLY WITH ADEQUATE
VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE WITH GOOD LOCAL VENTILATION. FLEXIBLE DUCTWORK SHOULD
EXTEND TO AREAS OF HIGH CONC TO PVNT LOC BUILDUP OF (ING 5)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING IF DIRECT CONTACT
LIKELY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: MERCAPTANS, ANHYDRIDES. IN RXN W/MANY CURING AGENTS,
CONSIDERABLE HEAT MAY BE EVOLVED, POSSIBLY LEADING TO EVOLUTION OF
SMOKE AND/OR TOXIC FUMES. SPILL PROC: IN AREA TO EVAC FUMES. DIKE
AR EA TO PVNT SPREADING. SHOVEL OR PUMP TODRUM/SALVAGE TANK. ABSORB
RESIDUAL MATL W/SAND, VERMICULITE, OR (ING 3). KEY1:T6
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:< 1
Vapor Density:HVR/AIR
Spec Gravity:1.20 (H2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, AMINES, AMIDES, STRONG LEWIS OR MINERAL ACIDS,
THIOSULFATES, CARBOXYLIC ACID, ALCOHOL, (SUPP DATA)
Stability Condition to Avoid:STORAGE IN OPEN CNTNRS, EXPOSURE TO HEAT
AND/OR OPEN FLAME, EXPOSURE TO INCOMPATIBLE SUBSTANCES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:SPILLED MATL & WATER RINSES ARE CLASSIFIED AS
CHEMICAL WASTE, AND MUST BE DISPOSED OF EITHER BY BURIAL AT A
CHEMICAL LANDFILL OR CONTOLLED BURNING BY A LICENCED CHEMICAL WASTE
FACILITY IN ACCORDANCE W ITH CURRENT LOCAL, STATE, AND FEDERAL
REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.